How to Install PEX Pipe in Bathrooms (Quick Tips) — by Home Repair Tutor

Posted on: March 7, 2017 by in Plumbing Videos
No Comments

How to Install PEX Pipe in Bathrooms (Quick Tips) — by Home Repair Tutor


Learn how to install PEX pipe in bathrooms instead of soldering
Get a complete supply list here http://bit.ly/28R1Cof

If you’ve never soldered before it can be intimidating. Plus you can easily catch your house on fire – never a good thing.

Today you’ll learn how to install PEX pipe in bathroom. This is a general overview that’ll share quick tips and get you familiar with PEX.

PEX pipes come in 1/2′ or 3/4″ at the local home stores. You can then get all the corresponding PEX crimping rings and fittings.

To effectively use PEX you need a crimping tool. In today’s video I use the SharkBite crimper but there are many different brands. The one downside to the SharkBite crimper are the short handles which prevent good leverage.

It’s pretty simple to use PEX. SharkBite recommends crimp rings be 1/8″ to 1/4″ from the end of the PEX. Slide your crimp ring over the PEX then the fitting into the pipe. Use your crimper at a 90 degree angle to the PEX and compress the crimp ring. It’s that easy.

The video shares how to remove PEX crimp rings if you mess them up. This too is pretty straight forward.

Check out the video for all the details

Hope you liked today’s video. It’s meant to be a high level overview of PEX and why you want to use it.

For a complete supply list go to

How to Install PEX Pipe (No Soldering!!!)

If you want to learn how to plan and start a DIY bathroom remodel to improve you home’s value check out Bathroom Repair Tutor

Sales Page for All Courses

Comments are closed.